Concrete Drill Bits & SDS Plus Hammer Drill Bits
Concrete, masonry, and hammer drill bit options for distributors, importers, tool brands, and professional tool programs.
BOAN Tools supplies straight shank masonry drill bits and SDS Plus hammer drill bits for concrete, brick, granite, stone, and similar building materials. The range includes plated, coated, high-helix, L-flute, extra-long, slot-tip, cross-tip, and three-carbide cross-tip configurations shown in BOAN's cataloged product range.
Concrete Drilling Product Range
Concrete drill bit selection starts with the drill machine and the substrate. BOAN separates general masonry drill bits from SDS Plus hammer drill bits so buyers can quote the correct product family.
| Product family | BOAN cataloged options | Best-fit buying situation |
|---|---|---|
| SDS Plus hammer drill bits | Slot tip, cross tip, and cross tip with three carbide options available upon request | Hammer drilling in concrete, granite, brick, and hard building materials |
| SDS Plus shank hammer drill bits | Diameters from 4 mm to 40 mm; overall lengths shown from 110 mm to 1000 mm across cataloged combinations | Professional concrete drilling, deeper holes, and distributor assortments |
| Straight shank masonry drill bits | Zinc plated, black oxide, nickel plated, black & white, tin-coated, high-helix chrome plated, high-helix nickel plated, high-helix zinc plated, L-flute, and extra-long length | Masonry, brick, block, and lighter building-material drilling with suitable drill equipment |
| Masonry drill Q/32181 RFD004(0) | Diameters from 3.0 mm to 25.0 mm; short series, long series, and extended drilling-wall lengths | Buyers comparing diameter, usable length, and wall-drilling depth before ordering |
Key Specifications for Concrete Drill Bit Sourcing
Accurate specification matching prevents job-site failures. Review the core dimensions and standards supported by BOAN's catalog.
| Specification | BOAN cataloged range or option | Why it matters to buyers |
|---|---|---|
| SDS Plus diameter range | 4 mm to 40 mm | Helps buyers match anchor holes, fixing requirements, and concrete drilling applications |
| SDS Plus overall length | 110, 160, 210, 260, 310, 360, 460, 600, and 1000 mm options shown across cataloged sizes | Separates short-hole, medium-depth, and deep-hole requirements |
| SDS Plus tip options | Slot tip, cross tip, and cross tip with three carbide | Gives buyers a practical comparison point for concrete, granite, brick, and hard-material drilling |
| Masonry drill diameter range | 3.0 mm to 25.0 mm | Covers common masonry and building-material hole sizes |
| Masonry drill length formats | Short series, long series, and extended drilling-wall lengths | Helps buyers avoid selecting the right diameter with insufficient drilling depth |
| Standards shown in catalog | DIN8039 for masonry drills; JB/T8368.1 or DIN8035 for SDS Plus hammer drill bits | Supports clearer product identification and specification review |
Concrete Drill Bit Sourcing Problems BOAN Helps Clarify
Avoid common procurement mistakes by aligning the substrate, tool interface, and drill bit specifications.
| Buyer situation | Practical risk | Product response |
|---|---|---|
| A buyer asks for concrete drill bits without naming the shank | The quotation may mix straight shank masonry bits with SDS Plus hammer drill bits | BOAN presents both product families separately so the tool interface can be confirmed first |
| The project involves concrete but the buyer does not confirm drilling mode | Rotary drilling, percussion drilling, and SDS Plus hammer drilling need different product choices | The SDS Plus range is positioned for electric hammer drill applications in concrete and hard building materials |
| Diameter is selected without checking total length | The bit may match the anchor size but fail the required depth | BOAN's cataloged SDS Plus table pairs diameter with overall length options up to 1000 mm |
| The buyer asks for heavy-duty performance using only brand-style language | “Best” or “top-rated” does not define material, hole depth, rebar condition, or tool type | The page should guide buyers to compare shank, tip, diameter, length, substrate, and standard before ordering |
| The inquiry mentions reinforced concrete | Rebar contact changes the drilling condition and may require a different product choice or validation | Ask buyers to state whether rebar is expected; do not assume a standard concrete bit is suitable for cutting steel unless the product is specified for that use |
Why B2B Buyers Use BOAN for Concrete Drill Bit Programs
A structured approach to product categorization, specification transparency, and supplier evaluation.
Clear product separation
BOAN's catalog separates straight shank masonry drills from SDS Plus hammer drill bits. This helps importers and distributors avoid confusing general masonry drilling products with hammer-drilling accessories.
Visible diameter and length planning
The cataloged SDS Plus table gives buyers a practical basis for choosing diameter and overall length combinations. This is important for concrete drilling because hole depth and tool compatibility are often as important as diameter.
Tip-configuration discussion
The SDS Plus range includes slot tip, cross tip, and cross tip with three carbide options available upon request. Buyers can use these configurations as a starting point for discussing concrete, granite, brick, and hard-material drilling needs.
Supplier evaluation support
BOAN provides company-level materials showing production workshops, CNC workshop, grinding workshop, rolling workshop, testing equipment, and qualification documents. Use these to help buyers evaluate the supplier behind the drill bit range while keeping product performance decisions tied to specifications and sample review.
Application and Tool Compatibility Guide
Match the substrate and drilling requirement to the correct BOAN product family.
| Application or question | Selection direction | BOAN range to review |
|---|---|---|
| Concrete hole drilling | Confirm SDS Plus hammer drill use, diameter, required depth, and tip type | SDS Plus hammer drill bits |
| Heavy-duty masonry work | Define the substrate, hole diameter, drilling depth, and machine type before comparing product options | SDS Plus hammer drill bits for hammer drilling; masonry drill bits for suitable masonry drilling |
| Brick and block | Confirm fastener size, hole depth, and whether hammer drilling is appropriate for the material | Straight shank masonry drill bits or SDS Plus hammer drill bits depending on the tool |
| Granite, stone, and hard building materials | Confirm hammer drilling equipment and tip configuration before quoting | SDS Plus hammer drill bits with suitable diameter and length |
| Reinforced concrete | Identify whether rebar contact is expected; standard concrete drilling and rebar cutting are different selection problems | Discuss the application before ordering; do not treat every concrete bit as a rebar-cutting bit |
| Carbide-tipped vs diamond concrete bits | Carbide-tipped hammer drill bits are commonly selected for impact drilling holes; diamond bits are generally a different product family used for coring or abrasive cutting conditions | BOAN's cataloged page focuses on masonry and SDS Plus hammer drill bits, not diamond core drilling products |
| Breaking up concrete | Breaking concrete is normally a chisel or demolition accessory task, not a hole-drilling bit task | Keep this page focused on drilling holes; route demolition-tool inquiries separately if the project requires them |
Concrete Drill Bit Buyer Guide
What concrete drill bit should I choose for a hammer drill?
For a hammer drill or rotary hammer with an SDS Plus chuck, start with SDS Plus hammer drill bits rather than straight shank masonry drills. SDS Plus shanks are designed for hammer-drilling systems, while straight shank masonry drills fit different tool setups.
After confirming the shank, choose the diameter and overall length. BOAN's SDS Plus range shows diameters from 4 mm to 40 mm and overall lengths from 110 mm to 1000 mm across cataloged combinations, so buyers can match both hole size and drilling depth.
How do I choose the right size concrete drill bit?
Start with the anchor, plug, sleeve, or fixing specification, then match the drill diameter to the required hole. Next, confirm the overall length and usable drilling depth. A bit can have the correct diameter and still be unsuitable if it cannot reach the required depth.
For SDS Plus concrete drilling, BOAN's cataloged combinations allow buyers to compare diameter and overall length together. For masonry drill bits, the catalog separates short series, long series, and extended drilling-wall lengths.
Which concrete drill bits are suitable for heavy-duty masonry work?
Heavy-duty masonry work should be defined by material, drilling mode, hole size, depth, and tool interface. A useful sourcing comparison checks shank type, tip configuration, flute form, diameter, length, and whether the bit is intended for hammer drilling.
BOAN's SDS Plus hammer drill bit range gives buyers a concrete starting point with slot tip, cross tip, and three-carbide cross-tip options available upon request. For lighter masonry or brick applications, the straight shank masonry drill family may be reviewed separately.
What affects durability in frequent concrete drilling?
Durability depends on the substrate, drilling mode, tool condition, operator pressure, dust removal, depth, and whether the bit is used within the intended application. A buyer should avoid choosing only by price or brand name without checking the work material and tool interface.
For procurement, compare diameter, length, tip type, shank compatibility, and sample results under the buyer's own drilling conditions. BOAN can support the sourcing discussion with cataloged product families and visible specifications, but final suitability should be checked against the actual material and tool.
What should buyers know before drilling reinforced concrete?
Reinforced concrete introduces the possibility of contacting steel rebar. Ordinary concrete drilling and rebar cutting are not the same task. If rebar contact is expected, the buyer should identify the reinforcement condition and confirm whether a suitable bit or separate drilling method is required.
This page should not imply that every SDS Plus concrete drill bit is designed for cutting rebar. Instead, it should guide buyers to state the substrate, rebar condition, hole diameter, depth, and drill machine before requesting a quote.
What is the difference between carbide-tipped and diamond concrete bits?
Carbide-tipped hammer drill bits are commonly used for impact drilling holes in concrete, masonry, brick, and stone with suitable hammer-drilling equipment. Diamond concrete bits are generally used for different tasks, such as coring or abrasive cutting conditions, and may require different machines, speeds, cooling, or operating methods.
BOAN's cataloged concrete-related range focuses on masonry drill bits and SDS Plus hammer drill bits. If the buyer needs diamond core drilling, treat that as a separate product intent rather than merging it into this SDS Plus concrete drill bit page.
Are concrete drill bit sets useful for distributors?
Concrete drill bit sets can be useful when the buyer needs a retail or professional assortment with multiple diameters. The key is to define the size ladder, shank type, packaging style, target user, and whether the set is for masonry drills or SDS Plus hammer drill bits.
BOAN's catalog includes drill bit set pages as well as individual masonry and hammer drill bit families. Use internal links to guide set buyers toward the drill bit set category while keeping this page focused on concrete drilling selection.
Manufacturing, Qualification, and Inspection Context
BOAN Tools is located in Danyang, Jiangsu Province, in the Yangtze Delta region. The company profile states that BOAN was set up in 1998 and specializes in high-speed steel twist drills, masonry drills, woodworking drills, and other cutting tools.
For supplier evaluation, buyers can review BOAN's company-level qualification materials, CNC workshop, grinding workshop, rolling workshop, production workshop, and testing equipment visuals. These materials help procurement teams understand the supplier behind the concrete drill bit range while product selection remains based on shank, diameter, length, tip configuration, standard, and application.
Company-level credentials include ISO 9001 management-system certification and third-party social responsibility or qualification materials referenced by BOAN. Present these as company-level credentials only. Do not describe them as product certification for every concrete drill bit unless the active project contains a specific product certificate.
Related Product Paths
for concrete and hard building materials.
Explore Masonry Drill Bitsfor brick, block, and general masonry drilling.
View Drill Bit Setsfor retail and distributor assortments.
Compare HSS Twist Drill Bitsfor metal-drilling programs.
Explore Wood Working Drillsfor woodworking applications.
Review Quality and Inspectionto understand BOAN's supplier evaluation materials.
Contact BOAN Toolsto discuss concrete drill bit diameter, length, shank, tip type, packaging, and quantity.
Request a Concrete Drill Bit Quotation
Send the basic product requirements so BOAN can review the correct SDS Plus hammer drill bit or masonry drill bit range.
Useful details include drill type, shank type, diameter, overall length, working depth, concrete or masonry material, whether rebar contact is expected, tip preference, packaging format, quantity, and destination market.
Direct Contact:
Email: grace@boantools.com.cn
Phone: +86 15951803296
Address: Huqiao Zhangxiang Village, Development Zone, Danyang City, Zhenjiang City, Jiangsu Province, P.R.China